Yokogawa CA11E Handy Calibrator

Note: For information only. Replaced by the Yokogawa CA310

The Yokogawa CA11E, Handy Calibrator, is a small, lightweight, dedicated calibrator that can simultaneously source and measure voltage and current. The CA11E is ideal for calibration and equipment checking needs at maintenance and production sites, requiring only instrument to make your task much easier. In addition, The CA11E incorporates a rotary switch and up and down keys for simple operation, its easy to carry out field calibration without needing to consult an instruction manual. Just open the carrying case cover and connect the cables, and you’re ready to take measurements.

Both signal source and measurement functions
Simple operation, easy to use
Rotary switch range selector
Setup of value to be generated using the up and down keys
Lightweight, compact body
Display resolution for current 0.001mA
Addition of loop check function
Automatic Power-off
Runs on 1.5 V AA-size Batteries or AC Adapter
Choose either “rubber boot” or “carrying case”
Complete circuit Protection

Click here to Make an Enquiry

If you would like more information regarding this product, simply email us here.

SKU: Yokogawa CA11E Categories: Calibrators, YOKOGAWA Tags: Calibrators, YOKOGAWA

Description

Yokogawa CA11E Features

Source and Measuring of Voltage and Current
Generates and measures voltages up to 30 V DC and currents up to 24 mA DC.
24 V (20 mA)/Loop check function
Enables measurement of generated current signals while supplying loop power to two-wire transmitter.
20 mA SINK Function
Absorbs the voltage supplied from an external power supply to its H terminal and simulates a two-wire transmitter making it ideal for loop checks.
4-20 mA and 1-5 V DC Step-up/ down Function
Sweep Function
Increases and decreases the output level to the preset level at a constant rate for the selected sweep time (16 or 32 seconds )

Yokogawa CA11E Applications

Maintenance and Preventative Maintenance Applications

In the Field Product Calibration
Production line quality Assurance

Specifications:

Yokogawa CA11E Calibrator
DCV Range	Source Range	Accuracy	Resolution
30 V	0 to ±30.00 V	0.05% + 2 digits	10 mV
10 V	0 to ±11.000 V	0.05% + 2 digits	1 mV
1 V	0 to ±1100.0 mV	0.05% + 2 digits	0.1 mV
100 mV	0 to ±110.00 mV	0.05% + 7 digits	0.01 mV
DCmA Range	Source Range	Accuracy	Resolution
20 mA	0 to ±24.000 mA	0.05% + 4 digit	0.001 mA

Yokogawa CA11E General Specifications
Display:	7 segments LCD
Measurement display update interval:	Approximately 1 update/sec.
Battery life:	Approximately 50 hours for 5 V DC output (with a load of 10kΩ or greater) Approximately 25 hours for 20 mA DC output (with a load of 5 V)
Automatic Power-off:	Approximately 10 minutes (Can be canceled by DIP switch setting)
Generation Signal:	By four-digit up/down keys
Level Setting Response of generator:	Approximately 1 second (from when the output begins to change until when the output level falls within the specified accuracy)
Dimensions:	Approximately 192(W)x92(H)x42(D) mm (Excluding protrusions)
Weight:	Approximately 440 g (including batteries)
Operating temperature:	0 to 50°C and 20 to 85%RH (no condensation)
Storage temperature:	-20 to 50°C and 90%RH or less (no condensation)