HT Italia HT7010 Clamp Meter 400A AC Autoranging

The HT7010 clamp meter is completely Autoranging making it extremely easy to use. The clamp is dedicated to the control of alternating currents up to 400A AC. The meter has a HOLD function to freeze the reading on the LCD display. The HT7010 has an Auto-Power Off function to preserve the internal battery.

Functions

Automatic selection of measurement ranges and fully Autoranging.
AC current up to 400 Amps.
AC/DC voltage up to 600 Volts.
Resistance ranges.
Continuity test with buzzer.
Data Hold function.
Auto Power Off.
Maximum conductor size 27mm.

Included Accessories

KIT4000: Test leads.
Carrying bag.
Battery.
User’s manual.

If you would like more information regarding this product, simply email us here.

SKU: HT Italia HT7010 Categories: Clampmeters, HT Italia Tags: Clampmeters, HT ITALIA

Description

The HT Italia HT7010 model is a complete Autorange meter which makes it extremely easy to use, it will automatically select the type of measurement and right range of values. This reduces any mistakes which can damage the instrument and, therefore, the final user. This clamp is used in the control of relatively low alternating currents and has a built-in HOLD function to freeze the reading on the LCD display. The HT Italia HT7010 clamp has an Auto PowerOff function to conserve the internal battery. It can be used to clamp-on a conductor with the maximum size of 27 mm. It is extremely small but very functional and with test lead storage on the back of clamp, when the operator isn’t executing any voltage measurements.

HT Italia HT7010 Specifications:

Specifications
ELECTRICAL SPECIFICATION
Accuracy is indicated as [% rdg + dgt]. It is referred to the following reference conditions: 23°C ± 5°C with RH < 80%
DC Voltage
Range	Resolution	Accuracy	Input impedance	Overload protection
1.8 ÷ 600.0V	0.1V	±(1.0% rdg + 2 dgt)	from 4kΩ if VIN ≤ 30V to 200kΩ if VI_N=600V	600Vrms AC
-0.6 ÷ -600.0V		±(1.0% rdg + 4 dgt)
Max operation time: 30s if V ≥ 30V

AC Voltage
Range	Resolution	Accuracy	Input impedance	Overload protection
0.00 ÷ 199.9V	0.1V	±(1.5%rdg + 5 dgt)	from 4kΩ if VIN ≤ 30V to 200kΩ if VI_N=600V	600Vrms AC
Max operation time: 30s if V ≥ 30V Frequency range: from 50 Hz to 500 Hz

AC Current
Range	Resolution	Accuracy	Input impedance	Overload protection
0.6 ÷ 400.0A	0.1V	±(1.8% rdg + 3 dgt)	50 – 60Hz	400Arms
Readings less than 50A: add ± 3 dgt to accuracy

Resistance and test continuity
Range	Resolution	Accuracy	Buzzer	Overload protection
0 ÷ 99.9Ω	0.1Ω	±(2.0% rdg + 10 dgt)	≤ 25Ω	600Vrms AC
100 ÷ 2000Ω	1Ω	±(2.0% rdg + 2 dgt)	≤ 25Ω	600Vrms AC
Max open voltage: 1.5V

GENERAL SPECIFICATIONS
Features
Auto Selection on ACV, DCV, ACA and Ohm Data Hold Auto power off Continuity Beeper
Supply
Battery type:	1 battery 9V NEDA 1604 IEC 6F22 JIS 006P
Low battery indication:	“+-” is displayed when the battery level is too low
Battery life:	about 250 hours
AutoPowerOff:	About 30 minutes after power-on
Display
Characteristics:	3 ¾ dgt (6000 counts) plus decimal point, unit symbol
Sample rate:	5 times/sec
Conversion mode:	Mean Value
Mechanical characteristics
Size:	198(L) x 66(La) x 46(H)mm
Weight (including battery):	about 260g
Jaws opening:	35mm
Max conductor size:	27mm
Climatic conditions
Reference temperature:	23° ± 5°C
Operating temperature:	0 ÷ 40 °C
Operating humidity:	< 75% RH
Storage temperature:	-20 ÷ 60 °C
Storage humidity:	< 80% RH
Safety standards
Comply with:	EN 61010-1
Insulation:	Class 2, Double insulation
Pollution:	Level 2
For inside use, max height:	2000m
Installation category:	CAT III 600V between inputs and to ground

HT Italia HT7010 Clamp Meter 400A AC Autoranging

HT Italia HT7010 Specifications:

Related Products

Signup for our Newsletter!