Yokogawa MY40-01 Features:Yokogawa MY40-01 Display: 3 1/2-digit LCD; 4000 count; backlight-illuminated; logarithmic bar graph; extension bar graph–no fluctuations, as the display shows the digits of a reading in the order in which each digit settles. Yokogawa MY40-01 Comparator function: The MY40 alerts you by turning on the LOW symbol and sounding the buzzer if the measured value is smaller than the reference value. You can allocate as many as three user-defined reference values to each rating. The factory-set defaults are 0.1 MΩ, 0.2 MΩ and 0.4 MΩ. Yokogawa MY40-01 Memory function: For each rating, you can save as many as 20 measurements at desired memory address numbers. |
|
Yokogawa MY40-01 Automatic discharge function: The MY40 automatically begins discharge when you turn off the MEAS switch. You can monitor the state of discharge by checking the bar graph and make sure discharge is complete by checking that the segment bar disappear.
Yokogawa MY40-01 High-voltage indicators: The high-voltage symbol and LED lamp come on to alert you when the MY40 is in insulation testing mode or if any voltage remains to be discharged. Yokogawa MY40-01 Live-line alarm: If you apply an AC voltage of approximately 40 V or higher across the input terminals, the MY40 alerts you by blinking the LED lamp and sounding the buzzer. Yokogawa MY40-01 Over range input alarm: If the voltage being measured exceeds 600 V during AC voltage measurement, the MY40 alerts you by flashing the Maximum Value indicator and sounding the buzzer. Yokogawa MY40-01 Auto-hold function: The tester retains the measured resistance for approximately 5 seconds after the MEAS switch is turned off. |
Yokogawa MY40-01 Specifications | ||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
Yokogawa MY40-01 General Specifications | ||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
|
||||||||||||||||||||||||||