The HT Italia XL421 can perform measurements and recording of True-Rms AC current up to 2500 amps in a single phase system. Applications include evaluation of load consumption, verification of nominal power of transformer, etc. The instrument is contained in a safety IP65 case with built-in flexible clamp which is easily connected to a variety of cable and bus-bar sizes. The system can record for a very long time, up to around a year. With DATALINK Windows software supplied with the model, the recorded data is easily downloaded to a PC for analysis.
HT Italia XL421 Functions:
- True-rms AC current measurement up to 2500A.
- Recording with sampling programmable period.
- Manual activation of recording.
- Low battery indication.
- LED indication of any operation.
- RS-232 interface.
- Data maintained without batteries.
- Programming with DATALINK software.
- Inbuilt/integrated 3000 amp flexible current clamp, type HTFLEX33DL.
- RS-232 serial cable, type C2004.
- Adhesive Velcro for fixing.
- Carrying bag, type BORSA2000.
- User’s manual.
|Specifications (accuracy stated at 23°C ±5°C ±(% of rdg + number of digits), < 60% R.H.)|
|Measurement Range||2 amps to 2500 amps|
|Accuracy||±(2.0% of reading + 2 digits)|
|Accuracy Error||additional error due to not centering cable: 2% of reading|
|Working Frequency||50/60Hz ±6%|
|Type of Measurement||True Rms|
|Maximum Crest Factor||3|
|Sampling Rate||64 point, 20ms for each sampling period|
|Sampling Period||1 sec, 6 sec, 30 sec, 1 min, 5 min|
|Memory Capacity||1 Mbyte Life in days (depending on batteries life): 5 days/1 sec; 34 days/6 sec; 170 days/30 sec; 364 days/1 min; 1820 days/ 5 min|
|Operating Temperature/Humidity||-20°C to 60°C; 0 to 100% R.H. (RS-232 connector closed)|
|Storage Temperature||-20°C to 60°C; 0 to 100% R.H. (RS-232 connector closed)|
|Insulation||class 2 (double insulation)|
|Protection Degree||IP65 (RS-232 connector closed)|
|Maximum Altitude||2000 meters|
|Reference Standards||LVD: IEC/EN 61010-1 CAT III 1000V (to ground), CAT IV 600V (to ground)|
|EMC: IEC/EN 61326 (1997) +A1 (1998) +A2 (2001)|
|Power Supply||2 x 1.5 volt type ‘AA’ alkaline batteries type LR6, AM3, MN1500|
|Battery Life||6 months|
|Dimensions||129mm (L) x 80mm (W) x 43mm (D)|
|Maximum Conductor Diameter||174mm|
|Weight||500g (with internal batteries)|