Why FLIR 4 Inch Infrared Inspection Window?
Opening electrical cabinets to perform IR and visual inspections of live components is dangerous work, exposing you to the risk of a hazardous arc flash incident. Out of necessity, it’s also a painstaking, time-consuming process.
Now you can put the added safety of new FLIR Infrared Windows between you and energized equipment to better protect yourself and eliminate the need for opening enclosures.
Much easier to install and use than other brands, FLIR IR Windows help you work faster with greater confidence. Perform inspections more efficiently and reduce the threat of arc flash injury significantly so you can get more done and stay in compliance with NFPA 70E requirements.
FLIR Infrared Inspection Windows Features:
Easy Installation – FLIR Infrared Inspection Windows install quickly and securely using the same design as common conduit connections:
• Only one hole to create for each window
• One simple PIRma-Lock™ ring nut to tighten
• Uses standard US punch tools for hole knockouts
Quick Access Hinged Cover – Simple thumb screw releases the permanently-hinged IR window cover:
• Easy, fl ip-open hatch for faster scans
• Prevents dropping, mix-ups, and loss
• Inside label for permanent identification
Broadband Crystal Infrared Window – Lens encased in rugged, anodized aluminum frame allows indoor & outdoor scans:
• Transmits short, mid and longwave IR images
• Supports visual inspections and fusion features
• Lets laser pointers and illumination shine through
Greater Productivity and ROI – Significantly reduces inspection time for more efficient assessments within NFPA 70E guidelines:
• Requires only one person instead of three
• Can reduce or eliminate need for cumbersome PPE
• Helps reduce vast majority of arc fl ash triggers
FLIR Integrity – FLIR backs IRW-Series windows with comprehensive testing and a limited lifetime warranty:
• Meets relevant UL, CSA, IEC, and IEEE standards/ratings
• Tested samples withstood arcs, vibration, and extreme humidity
• Limited Lifetime Warranty against manufacturer defects
FLIR 4 Inch Infrared Inspection Window Specifications:
OVERVIEW | |
Body Material | Anodized Aluminum or Stainless Steel |
Required Hole Diameter (Nominal) | 4.5″ (114.3mm) |
Warranty | Limited Lifetime Warranty Against Manufacturer Defects |
Window Thickness | 2mm (0.07″) |
ENVIRONMENTAL | |
Maximum Operating Temperature | 500°F/260°C |
NEMA Environment Type | Type 4/12 (outdoor/indoor) |
Optic Maximum Temperature | 1355.6°C (2474°F) |
IMAGING & OPTICAL | |
Broadband IR Short Mid & Longwave | √ |
Crystal Insert Diameter | 95mm (3.74″) |
Greenlee Punch | 742BB |
Overall Height | 136.5mm (5.37″) |
Overall Thickness | 29.25mm (1.15″) |
Overall Width | 127.44mm (5.01″) |
Picture-in-Picture & Fusion Image Blending | 6221mm^2 (9.64in^2) |
Viewing Aperture Area | 6221mm^2 (9.64in^2) |
Viewing Aperture Diameter | 89mm (3.50″) |
Visible Light Spectrum | √ |
MEASUREMENT & ANALYSIS | |
CSA Certification Product Class 3211 07 |
√ |
KEMA [IEC 62271-200] | Arc flash test standard: 5kV, 63kA for 30 cycles at 60Hz |
Maximum Pullout Strength | 1678 kg (3700 lbs) |
TUV [ANSI – IEEE C37202 section A36] | Impact Resistant Cover |
TUV [IEC 60068-2-3] |
√ |
TUV [IEC 60068-2-6] | 102 m/s^2 vibration withstand |
TUV [IEC 60529] | IP69 |
UL 50 Environment | Type 4/12 |
Underwriters Laboratories [UL 50V] |
√ |