The Tradinco Traqc-7 PC Pressure Calibrator offers you the best solution for each job with a wide choice of almost every required pressure measurement up to 20 barg with an accuracy of 0.02% . You can choose the most suitable range, specifically for these critical measurements or a wider range for the general tasks.
With the Tradinco Traqc-7 PC Pressure Calibrator you can choose the most suitable range, specifically for these critical measurements or a wider range for the general tasks. The option for a PCB mounted barometric reference sensor increases this functionality even more. It allows you to power your transmitters and measure the common mA or V output signals precisely.
The large memory allows you to store your calibration procedures and results. The calibration data is load into AutoCal® Tradinco’s powerful calibration management software with only one mouse click. All results are stored, errorless and organised.
Tradinco Traqc-7 PC Pressure Calibrator Specifications:
Accuracy | ± 0.02% F.S. (± 0,04% F.S. for ranges ≤ 400 mbar). |
Operating temperature | between 5°C and 45°C. |
All stated accuracies include linearity, hysteresis and repeatability. | |
Sensor Range | Ranges 0 to 100, 160, 250, 400, 600 and 1000 mbar-g |
0 to -1 bar-g, 1100 mbar-a, 10 bar-a, 0 or -1 to 1, 1.6, | |
2.5, 4, 6, 10, 16 and 20 bar-g (others on request). | |
Barometer | Range 850 to 1150 mbar-a (barometric reference only)Option |
Generation and control | Pressure generation with integrated hand pump, control resolution 0.01 mbar-g |
Range -1 to 10 or 20 bar-g, complete with volume regulator and vent valve | |
control resolution 0.01 mbar-g | |
Connections | Pressure¼”npt female, Electric: 4mm |
Power/operation : | Internal 2200 mAh Li-Ion battery |
> 12 hours on internal Li-Ion battery, (depends upon operating mode) | |
Housing | IP54 |
Dimensions and weight | 240 x 100 x 50 mm (l x w x h), approx. 1,3 kg |
Display | 2-colour LCD, 70 x 70 mm, 128 x 128 pixels, with backlight |
Resolution | 4, 5 or 6 digits |
Interface | RS232 Interface, lemo connector |
Menu language | NL, GB, FR, D |
Electric | Loop supply for externally powered transmitters |
4mm 250 Ohm resistance for HART® transmitters | |
DC measurement | 0 – 30 V, 0.02% R+ 0.01 FS, 0 – 24 mA, 0.02% R+ 0.01 FS. |
DC generation | 0 – 11 V, 0.02% R+ 0.01 FS, 0 – 24 mA, 0.025% R+ 0.01 FS. |
Transmitter supply | 21V |
Certification | CE-certified, calibration certificates. |
Data storage | Large internal memory 2MB, suitable for storage of 32 calibration procedures |
and calibration results. Suitable for up- and downloading in combination with | |
AutoCal® | |
Supplied Accessories | Traqc-7 PC, in a robust rugged blue carrying case, , |
Electrical test leads (x2) | |
110-230VAC charger | |
Operating manual | |
Calibration Certificate | |
Certificates for pressure and electric signals. | |
Optional Accessories | 230VAC mains adaptor, 230VAC mains adaptor with RS232 interface. |
connection, RS232 cable, soft canvas carrying case with shoulder strap. | |
Barometric reference sensor 750 to 1150 mbar-a, 0,02% FS. | |
Low pressure connection set max. 10 bar-g. | |
High pressure connection set 10 – 400 bar-g. | |
Pressure relief valve (only recommended for ranges up 10 bar-g). | |
Switch test functions for high voltage (230V). | |
Accredited calibration certificate for pressure and electrical signals, | |
traceable to international standards , AutoCal® calibration management | |
software. |
Note:g=gauge, a=absolute pressure