Rohde & Schwarz Scope Rider
A lab oscilloscope in a handheld instrument When debugging embedded devices in the lab or analyzing complex problems in the field, the Rohde & Schwarz RTH1002 and RTH1004 Handheld Digital Oscilloscopes offer the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery-operated handheld device.
In the lab The Rohde & Schwarz Scope Rider delivers lab performance in a portable, battery-powered package with the added benefit of isolated channels. With 33 automatic measurement functions, the Scope Rider delivers the capabilities of a lab oscilloscope when analyzing signal parameters.
Safe measurements on power electronics The Rohde & Schwarz Scope Rider Series offers up to four isolated input channels with CAT IV 600 V rating that allow measurements on high-voltage electronics without compromising safety. Digital control signals can be analyzed with the 8-bit logic interface that is isolated from the analog input channels. The protocol trigger and decode capability of these handheld scopes is unprecedented in handheld oscilloscopes and provides direct display of decoded messages. A digital trigger system with a large set of triggering functions enables it to accurately trigger on the signal that needs to be analyzed. Requiring only minimum bench space, the 2- and 4-channel Scope Rider Handhelds are the perfect tool for even complex R & D debugging tasks and also offers the flexibility required for use in the field.
In the field With the Rohde & Schwarz Scope Rider Oscilloscopes there is no longer a need to compromise on performance when troubleshooting in the field. The RTH1002 and RTH1004 scopes provide all the features and capabilities of today’s lab oscilloscopes in a rugged and portable format, with enough battery power for a day’s work. Isolated inputs with 600 V CAT IV rating allow safe measuring in all environments. If extra safety is needed, they can be remotely controlled with the Web browser via wireless LAN, separating the measurement location from the place where the user controls the instrument. With five instrument modes, including an integrated multimeter (RTH1002 only), the Scope Riders are the perfect troubleshooting instrument for work in the field.
Rohde & Schwarz Scope Rider Model Configuration:
Base unit (including standard accessories: one 500 MHz, 10:1, 600 V CAT IV voltage probe for each oscilloscope input channel; one 600 V CAT IV test lead per meter input; compact manual; Lithium-Ion battery pack; power supply with plugs for EU, CH, UK, US, CAN, China, Australia)
Model RTH1002 – Handheld Digital Oscilloscope, 60 MHz, 2 channels, DMM
Model RTH1004 – Handheld Digital Oscilloscope, 60 MHz, 4 channels
Hardware options RTH-B1 – Mixed Signal Option, 250 MHz
Bandwidth upgrades for:
RTH1002 RTH-B221 – 100 MHz bandwidth
RTH-B222 – 200 MHz bandwidth
RTH-B223 – 350 MHz bandwidth
RTH-B224 – 500 MHz bandwidth
RTH1004 RTH-B241 – 100 MHz bandwidth
RTH-B242 – 200 MHz bandwidth
RTH-B243 – 350 MHz bandwidth
RTH-B244 – 500 MHz bandwidth
R&S Scope Rider Features:
Capacitive touch and keypad operation
❙ Full operation via touch panel or keypad ❙ See more with a 7″ color display ❙ Easy parameter adjustment with multifunction wheel ❙ Large buttons for use with gloves
❙ Maximum safety in all environments: CAT IV 600 V/CAT III 1000 V ❙ IP51 housing that meets military environmental requirements ❙ Nonslip and impact resistant rubberized surface
Excellent connectivity and much more
❙ Wireless LAN and Ethernet for web-based remote control and quick data access ❙ Finish faster with one-touch documentation ❙ MicroSD card and USB device/host support ❙ More than 4 hours of battery power
Maximum safety in all environments Troubleshooting in industrial environments presents many challenges. Debugging electronic systems at a modern production site can require analyzing low-voltage digital signals, as well as verifying the power quality of a 380 V supply, or testing the power efficiency of electrical drives. The R&S®Scope Rider CAT IV 600 V rating provides this level of flexibility in a single device.
Highest sensitivity and safe high-voltage measurements at the same time Double isolation of all input channels, the multimeter (channel 1) and the digital interfaces, including the logic channel (MSO), make it possible to measure in mixed circuits with different ground levels. This reduces the risk of accidental short circuits and enables safe measurements in high-voltage electric installations. Sensitive analog or digital control circuits can be measured without compromising safety.
IP51 housing – tested in line with military environmental standards Thanks to the passive cooling concept, the handheld oscilloscope feature a sealed IP51, dust and drip-proof housing. Tested in line with military environmental standards, the R&S®Scope Rider provides the ruggedness that is needed for harsh environments. A rubberized surface with large keys makes it easy to use in difficult environments.
About Rohde &Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, radiomonitoring and radiolocation. Founded more than 80 years ago, this independent company has an extensive sales and service network and is present in more than 70 countries. The electronics group is among the world market leaders in its established business fields. The company is headquartered in Munich, Germany. It also has regional headquarters in Singapore and Columbia, Maryland, USA, to manage its operations in these regions.