• High Precision.
• Basic accuracy 0.09%.
• True RMS measurement.
• Ensured Field Site Safety.
• Conforms to safety standards EN 61010-1,
  1000V CAT III, 600V CAT IV.
• Safety shutters for preventing erroneous insertion of test leads into current measurement terminals.
• Current direct reading function provided by current clamp sensor (optional accessory).
• Low-pass Filter (LPF).
• Logging-mode memory for 1600 data.
• USB communication, applicable software
  (Optional DMM communication package).
• Closed Case Calibration.
• 3-year Warranty.

Standard Accessories (included)

• Four type 'AA' (R6) dry cells, test lead set #98015, 440mA/1000V and 10A/1000V fuses (installed), and instruction manual.

Measurement

Range

Accuracy

DC Volts

600.0mV to 1000V

0.09% + 2 digits

AC Volts (RMS)

600.0mV to 1000V

0.5% + 5 digits

DC Current

600.0µA to 10.00A

0.2% + 2 digits

AC Current (RMS)

600.0µA to 10.00A

0.75% + 5 digits

Continuity Check

buzzer sounds at 50Ω ±30Ω or less  Range: 600Ω

Resistance

600.0Ω to 60.00 MΩ

0.4% + 1 digit

Diode Test

2.000V

1.0% + 2 digits

Temperature ^Note1

-50°C to 600°C

2.0% + 2°C

Capacitance

10.00nF to 1000µF

2.0% + 5 digits

Frequency

10.00 Hz to 99.9 kHz

0.02% + 1 digit

Measurement Functions:

DC voltage, AC voltage, DC current, AC current, resistance, frequency, temperature, capacitance, continuity check, diode test and Low-pass filter (can be switched on/off) and RMS/MEAN detection.
For AC voltage/current, RMS/MEAN detection can be switched.

Additional Functions:

Data hold/auto hold/range hold, maximum/minimum/average values, resistance, relative and percentage value calculation, memory function, communication function, logging-mode memory, auto power off and backlight.

Display:

3.5-digit LCD: 7-segment
Digital display: Main display 6000 counts
Bar graph display: 31 segment
Polarity indicator: "-" appears automatically when the polarity is negative
Overrange indicator: "OL" appears

Measuring Rate:

Instrument: 5 times/sec
Frequency: 1 time/sec
Capacitance: max. 0.014 times/sec (1000µF)
Resistance: 2.5 times/sec
Temperature: 0.7 times/sec
Bar graph display: 25 times/sec
DC voltage: 5 times/sec
Diode test: 5 times/sec

Operating Temperature:

-10°C to 55°C; 80% RH or less (no condensation)
 40°C to 55°C; 70% RH or less

Storage Temperature:

-30°C to 70°C; 70% RH or less (no condensation)

Temperature coefficient:

Add the accuracy 0.1/°C to the basic accuracy at a temperature within
-10°C to 18°C and 28°C to 55°C

Power Supply:

Four type "AA" (R6) dry cells

Battery Life:

Approx. 300 hours (for continuous DC voltage measurement with Alkaline cells)

Withstanding Voltage:

6.88kV for 5 seconds (between input terminals and casing)

Compliance/Standards:

safety EN61010-1, EN61010-031, 1000V CAT III, 600V CAT IV,
pollution level 2, 2000m max. above sea level
EMC: EN61326-1 Class B, EN55011 Class B Group 1

Dimensions:

Approx. 90mm (W) x 192mm (H) x 49mm (D)

Weight:

Approx. 570g (including batteries)