Base Plate (MX150)
The main module and input/output modules are connected by means of connectors on a base plate.

Using the Base Plate for Six Input/Output Modules
Although the position for the main module is fixed, input/output modules can be configured in any position using the module connectors. One to six modules can be used.

Connector covers (772066) are available for vacant slots.

Screw Terminal Block
A separate screw terminal block is available for the MX110-UNV-M10 Ten-Channel Medium-Speed Universal Input Module and the MX115-D05-H10 Ten-Channel High-Speed Digital Input Module.
 

Detach the plate with clamp terminals from the MX110-UNV-M10 or MX115-D05-H10. Then, use the connection cable (772062) to connect the input module without the plate to the screw terminal block (772061).
 

The option code /NC can be added to the MX110-UNV-M10 and MX115-D05-H10 to indicate whether or not the plate with clamp terminals is included at the time of delivery. If the user requires only the screw terminal block and not the clamp terminals, please specify either MX110-UNV-M10/NC or MX115-D05-H10/NC.

Mounting on Racks or Panels Using the DIN Rail
Use the DIN rail for mounting on on racks or panels. The DIN rail can be easily attached using the dedicated bracket. Two brackets come standard with the base plate (MX150).
 

Use the DIN rail for mounting on racks or panels. The DIN rail can be easily attached using the dedicated bracket. Two brackets come standard with the base plate (MX150).