Yokogawa MX100 Features 1

Model Series MX100 > Benefits > Software > MX100 Features > 1 > 2 > 3 > 4 > 5 >

PC Based Data Acquisition

Model Type MX100
PC-Based Data Acquisition Unit Type MX100 - Features Page 1 of 5

Multi-Channel Capability

Measurement interval	Maximum number of measurable channels	Measurable objects	PC Software		Number of necessary modules (example)
Measurement interval	Maximum number of measurable channels	Measurable objects	MX100 Standard Software	MXLOGGER	Main Module (MX100)	Four channel High-speed Universal Input Module MX110-UNV-H04	Ten channel Medium-speed Universal Input Module MX110-UNV-M10
10ms	24 channels	DCV/TC/RTD/DI	√	√	1	6	-
50ms	24 channels	DCV/TC/RTD/DI	√	√	1	6	-
50ms	120 channels	DCV/TC/RTD/DI	-	√	5	30	-
100ms	60 channels	DCV/TC/RTD/DI	√	√	1	0	6
100ms	300 channels	DCV/TC/RTD/DI	-	√	5	0	30
200ms	500 channels	DCV/TC/RTD/DI	-	√	9	0	50
500ms	600 channels	DCV/TC/RTD/DI	-	√	10	0	60
1000ms	1200 channels	DCV/TC/RTD/DI	-	√	20	0	120

√ measurement that support is possible
- measurement that support is not possible

High Isolation Voltage

Reinforced insulation between the input terminal and the case handles 3700 Vrms for one minute, or 600 Vrms/VDC continuous. The relationship between measurement intervals and the number of channels largely depends on the performance of the PC. The actual performance may differ from that shown in the table.

PC System Requirements
CPU: Pentium 4 3.2 GHz; Memory: 1 GB; OS: Windows 2000; Hard disk: 160 GB; Communication interface: Ethernet 100Base-TX.

Multi-Interval Measurement

Three types of measurement intervals can be used in a single system in various combinations. Measurement intervals are specified for each module. It is also possible to set different types of input modules to the same measurement interval or to set the same type of input modules to different measurement intervals. Twelve measurement intervals are available as user-selectable options: 10 ms, 50 ms, 100 ms, 200 ms, 500 ms, 1 s,
2 s, 5 s, 10 s, 20 s, 30 s and 60 s. Please note, however, that measurement intervals of 10/50 ms cannot be set to the Medium-speed Universal Input Module (MX110-UNV-M10).

Examples of Setting Measurement Intervals
Multi-interval systems can be flexibly built for each module as shown in the figure below. Three colors are used to indicate the three types of measurement intervals.

Examples of Setting Measurement Intervals

Monitor Window Using Yokogawa's Proprietary PC Software
The window shows measurement values by measurement intervals. Measurement can be performed while confirming rapidly-changing signals and slowly-changing signals simultaneously.

	Measurement of sine waves at 0.5 Hz with a measurement interval of 100 ms
	Measurement of sine waves at 8 Hz with a measurement interval of 10 ms
	Measurement of sine waves at 1 Hz with a measurement interval of 50 ms

Monitor Window using the PC Software Developed by Yokogawa

Model Type MX100 PC-Based Data Acquisition Unit Type MX100 - Features Page 1 of 5

Model Type MX100
PC-Based Data Acquisition Unit Type MX100 - Features Page 1 of 5