Reed R8800 Current-Voltage Loop Calibrator

reed logo red

This Reed R8800 Current-Voltage Calibrator simulates a transducer or measure the current flow in a transducer loop. Reed R8800 can works in the source mode, calibrate meters, thermocouple indicators, data loggers, for signal injection, semiconductor characterization, or as a backing off source.

REED R8800 Features

  • Measure and calibrate current signals
  • Provides a precise current and DC mV source
  • Able to power or measure a 2-wire current loop
  • Drives loads up to 500Ω
  • LCD display with a maximum of 1999 counts
  • Includes test leads and battery

PDF   REED R8800 Instruction Manual

Authorised Australian Distrinutor

CE logo

1 Year Warranty

If you would like more information regarding this product, simply email us here.
  • This field is for validation purposes and should be left unchanged.
SKU: Reed R8800 Categories: , Tags: , ,

REED R8800 Specifications

  • SOURCE & MEASUREMENT Current Range: 0 to 19.99mA; 0 to 24mA Resolution: 0.01mA; 0.1mA Accuracy: ±(0.25% f.s. + 1 dgt.); ±(0.5% f.s. + 1 dgt.)
  • DC mV SOURCE Voltage Range: -199.9mV to +199.9mV Resolution: 0.1mV
  • Accuracy: ±(0.25% f.s. + 1 dgt.) GENERAL Display: LCD, max. 1999 counts Power Supply: Single 9V battery Dimensions: 150 x 70 x 40mm Weight: 232 g Sampling Time: Approx. 0.4 second Operating Temperature: 0 to 50°C (32 to 122°F) Operating Humidity: < 70% RH

REED R8800 Battery Replacement When the batteries become exhausted or drop below the operating voltage, “BAT” will appear in the left-hand side of the LCD display.

1. Disconnect the test leads from the meter.

2. Open the battery door by loosening the screw using a Phillips head screwdriver.

3. Insert the battery into battery holder, observing the correct polarity.

4. Put the battery door back in place. Secure with the two screws.

Current Source

1. Insert the black test lead banana plug into the negative (COM) jack and the red test lead banana plug into the positive (mV-mA) jack.

2. Set the function switch to the “mA source” position.

3. Press the “0~19.9mA” button for a 0.01mA display resolution (max display is 19.99mA); press the “0~24mA” button for a 0.1mA display resolution.

4. Adjust the “CAL ADJUST” knob to match the current output display value.

Current Measurement

1. Insert the black test lead banana plug into the negative (COM) jack and the red test lead banana plug into the positive (mV-mA) jack.

2. Set the function switch to the “mA measure” position.

3. Press the “0~19.9mA” button for a 0.01mA display resolution (max display is 19.99mA); press the “0~24mA” button for a 0.1mA display resolution.

4. Remove power from the circuit under test, then open up the circuit at the point where you wish to measure current.

5. Touch the black test probe tip to the negative side of the circuit, and touch the red test probe tip to the positive side of the circuit. Read the current value in the display. www.reedinstruments.com 1-877-849-2127 | info@reedinstruments.com