Fluke T3 Voltage and Continuity Tester

Page Navigation >

Electrical Testers > Model T3

Fluke Electrical Testers

Model T3 Voltage and Continuity Electrical Tester

The new Fluke T3 is a voltage and continuity tester that is designed to work long and hard. There are no settings, just probe the circuit and the T3 will show you whether you are looking at AC volts, DC volts, or an open circuit. You don't even have to turn it on or off! With seven different voltage indicators, it can clearly differentiate between key voltage levels. All inputs of the T3 are protected to EN61010-1 CAT III 1000V rating.

	Compact and rugged, easily fits in a tool pouch or overall pocket.
	LEDs clearly indicate 7 AC and 7 DC nominal voltage levels.
	Indicates dc voltages as low as 6 volts.
	DC polarity indicator.
	Automatically selects continuity beeper or voltage measurement mode.
	Can stay connected much longer than solenoid type testers.
	Rugged enough to withstand a 3 meter drop.
	Protected to 1000 V for use in CAT III environments, and to 600 V for use in CAT IV environments.
	The Auto-ON light at the top will let you know that it's working and will automatically turn off after approximately eight minutes of inactivity.
	Heavy-duty test leads for long life.
	One year warranty.

Measure DC Voltage ^Note1	Preset 6V, 12V, 24V, 36V, 48V, 110V and 220V
Measure AC Voltage ^Note1	Preset 24V, 48V, 120V, 208V, 240V, 277V, 48V
Measure Continuity	< 20,000Ω
DC Polarity Indicator	Yes
Safety Rating	1000V Overvoltage CAT III
Warranty	One-year

Note¹: Voltage levels will vary depending on country of intended use.

Model Name	Product Description
Model T3	Voltage and continuity tester. (Note: Test Leads are fixed)

Fluke Model H5 Electrical Tester Holster

Model H5 Electrical Tester Holster

	Rugged fabric holster includes flap for lead storage and built-in belt loop.
	Fits model T3 and T5 testers.

Fluke Model AC285 SureGrip™ Alligator Clips

Model AC285 SureGrip™ Alligator Clips

	Multi-purpose tooth pattern grips anything from fine gauge wire to a 3/4 in. nut.
	Nickel-plated steel jaws.
	CAT III 1000V, CAT IV 600V, 10A.